KoA / EdGI Steel AEG Barrel (261mm - 285mm) + RHop
KoA / EdGI Steel AEG Barrel (261mm - 285mm) + RHopKoA / EdGI Steel AEG Barrel (261mm - 285mm) + RHop

KoA / EdGI Steel AEG Barrel (261mm - 285mm) + RHop

£170.00
0

EdGI Custom Works make some of the finest Airsoft components in the world.
These Stainless Steel barrels have been custom made to our spec for use in many AEGs and TM Recoils.  They are the ideal length for the TM CQBR, HK416 DELTA, SCAR-L, the shorter SCAR-H and many more.



These Stainless Steel barrels are the highest quality barrels available for Airsoft. 
They are CNC machined and lapped to a mirror finish for extreme straightness and concentricity.  Due to the extremely fine surface, they don't trap dirt or debris like other barrels.  Their extreme hardness will allow them to be used with even super-hard competition-grade ammo over and over again.  They feature a 6mm square cut hop window that's perfectly cut for regular hop rubbers, flat-hop systems and R-Hops. 


The Stainless Steel barrels will last a lifetime!

 

The R-Hop is the true next-generation hop-up system.  When installed correctly it provides a much longer contact area to impart backspin on the bb. This results in a much greater amount of potential backspin which in turn allows you to effectively use much heavier ammo.  Due to the law of the conservation of momentum, the heavier ammo - if an equivalent amount of backspin can be applied - will travel further than lighter ammo in almost every build.

The end result is a system that can float bbs to much greater ranges with much greater accuracy and consistency than traditional hop systems are able to.

Contrary to popular accounts, the R-Hop is fully adjustable once installed however care should be taken when adjusting the system as it is possible to apply too much hop and jam the ammo in the chamber.  This can be prevented from happening but it may limit the maximum usable weight of ammo.

A typical result when paired with a 285mm 6.02 EdGI inner barrel in a platform that gives 1-1.1J or 350fps with 0.2g bbs, firing Nuprol Rzr 0.32g BBs, is an effective range of 65-70m metres accurate to approximately 1m square with a max range of around 80m.

The R-Hop can be tuned to work for lighter ammo on request - 0.25g - 0.28g - but to see the real benefits it is recommended that you use the heaviest ammo you can afford.